Kiki is nearing the 12,000 mile mark which means a bunch of service needs to be done and I’m trying to do most of it myself to save a bit of cash. One of the things I haven’t done before on the GS is change the spark plugs. Although my bike is a single-cylinder model, it’s a “dual-spark” which means there are two spark plugs. I decided to use the stock NGK DR8EB plugs as replacements and the price for these were about $4.50 each as opposed to an Iridium plug which goes for upwards of $20. Too pricey for me and the performance difference is debatable.
For a nice guide on how to change the spark plugs, you can check out the FAQ at the Chain Gang site. However, there were a few parts of the procedure that could use a little more detail. For my 2007 model, I’d recommend taking off the plastics, removing the snorkel, the battery, and the battery tray. By doing this, you can access the tops of the coil/caps. There is a grey rubber sleeve that secures the coil to a metal mount, and you’ll want to turn the coil so that the sleeve comes off of the metal mount. After that, you can pull the coil/cap up off of the plug. It’s easier if you have small hands. For the coil/cap on the side, you might be able to push that up from the side, rather than pull up from the top.
Click on the photos below to view at Flickr where you can see highlighted notes.
Once you get the coil/caps off, blow off the plug area with compressed air to get rid of any dirt. Next, you can use the spark plug socket included in the BMW toolkit to unscrew the plugs. For the center plug, you will have to drop the socket down onto it from by where the battery was. Then, use a big screwdriver and put it in the top of the socket. My plug was in there pretty tight, so I used some vice-grips on the screwdriver handle to turn the socket. Once you get the plugs out, just reverse the process and you’ll be done!
On my old Supercub, changing the plug would take only a couple minutes since it was so easily accessible. The BMW F650 GS’s plugs are tucked in there pretty tightly and there was plenty of cussing and sweating when I was figuring out how to do it. But now that I know how it’s done, the next change will be pretty easy. Anyways, I hope this post helps someone who might be unclear on what they have to do to change their plugs. You can always leave a comment here if you want me to contact you for more explanation!